Michigan Solar Installations

Archive for October, 2009

Home Bio Diesel Production

The flammability point of biodiesel.

I’ve mentioned that it’s biodegradable that it’s safe to use blah, blah, blah, all these different things, but I want to show you how safe this is. This biodiesel, I’ve made from canola oil, so I’m going to pour a little bit in here, and now it’s time to play with fire. We’re going to come down here. Light up our torch, notice I have my fire extinguisher people.

We now have a nice blow torch going. Notice I’ve got some nice biodiesel on the ground here. I want to show you that biodiesel is very, very safe to have around. I can’t light it on fire. This torch is a really hot torch. I’m actually using map gas. Map gas actually has a higher flame temperature. So I’m just trying to light this sucker on fire, and you know what, she’s not going. That’s because biodiesel isn’t actually that flammable. It has a much higher flash point than normal diesel, and I’ve just proven it.

And that’s one of the reasons people like biodiesel is because it’s so safe to use. In fact, if this stuff spills on the ground the MSDS and things that it calls for is get a garden hose and wash it off. It’s not going to light up. It’s as safe to have around as vegetable oil. No I have to cavy up that this biodiesel has been cleaned. We have got all the methanol out of it, and we’ll talk a little bit about that later, but I just want to show you that it’s very clean and it just doesn’t burn. That’s that little fun experiment. We want to show you that biodiesel will burn though. When it’s under pressure it does burn quite well. For this experiment I’m just going to start a fire, and I’m going to spray it into it. As you can see it will burn, so when it’s in your diesel and it becomes injected, it will burn beautifully. That’s biodiesel burning.

The DR Performance Diesel Products & Edge Diesel Products are both fully compatible with biodiesel- Nathan Young

AT&T Tech ChannelFor Green Computing

Analysis of Cleanliness

You cannot control that which you do not measure.

In more and more industries, the exact knowledge of particle contamination is gaining in importance. Contamination of materials in dimensions of a few micrometers was mainly of concern for the pharmaceutical and semiconductor industries. However, not only manufacturers of circuit board components, but also traditional car parts suppliers face new demands on particle recognition and contamination source identification.

Cleanliness for the automotive parts manufacturers has become a huge topic in today’s ever challenging continuous improvement world. The need to define, measure and control the levels of particulate contamination on product is the new norm for suppliers and automotive OEM’s.

Cleanliness directly relates to product warranties, reliability, performance and safety issues. It has long been known that a dirty product gives us poor quality and low life expectancy. The dirtier the transmission from new, the less time it will last.

It is crucial now to identify particles and their source so that effective elimination can be achieved. Residual contamination consists of particles that persist on the component’s surface after the final step in manufacturing. Such contaminants are introduced via parts from suppliers or arise during processing. After vehicle assembly, the contaminant particles can cause severe damage, loss of function or reduce the lifetime of the product.

Cleanliness is defined as the contamination level of a component surface. Common measures to quantify the cleanliness are mass of the contaminants as well as number, size of the dirt particles. In general, the customer will specify contamination limits. The supplier then has to maintain these levels and document them regularly by means of contamination analysis.

The analysis of the contamination has to be proven to not affect the result and to be effective in evaluating all the contamination present. Methods of extraction and evaluation are specified in the international standard ISO 16232. Particular attention must be paid to the extraction method to ensure no contributing factors are introduced to the evaluation. There are different methods of counting the resulting extracted particles but by far the most accurate, repeatable and cost effective is automated microscope analysis. The microscope with software can scan the filter membrane; sort the particles by size class and even determine basic material composition (metal, non-metal, fiber). Once the data is gathered a custom report can be generated based on the customer requirements.

For more information on cleanliness analysis, visit http://www.onclean.com

Chris Trower is the President of Onclean Labs Inc, an Ontario based lab specializing in third party cleanliness analysis testing.

Going Green-6

Saving Money and the Environment

With the current economic problems, hopefully more people are interested in saving money and recycling. Businesses are always interested in keeping the customers they have and getting new ones.

The cost of fuel has been big in the news for years but, when compared to plastics, it’s a small percentage of petrochemical use. Saving on the use of petrochemicals for making plastics can extend the timeframe before peak oil and lower the price of fuels.

Most grocery stores offer a five cent per bag discount if you bring in your bags. You can do that in a variety of ways. One is by taking the old plastic bags back and another is using cloth bags, which can often be purchased at the store. Usually, grocers will sell cloth bags with their advertising on them at their cost, which is cheaper than an equivalent type bag can be purchased elsewhere. By doing that, the grocer gets their investment back and advertisement as well. If your grocer doesn’t have a program of that type, tell them about the advertising value and mention that you take your bags everywhere, including their competitor’s store.

If you don’t want to spend the money on cloth bags, reuse your old plastic ones. Plastic bags aren’t as durable as cloth and it’s a good practice to double bag when using a plastic bag more than once or twice.

We’ve found cloth bags to be a good investment. Most of our bags are almost twenty years old. If we save two cents a bag and buy ten bags of groceries, and do that five times a month, we’ve saved a dollar a month. That doesn’t sound like much but our cloth bags paid for themselves the first year, with the last eighteen plus years being pure savings.

Tying the bags off keeps the goods inside from spilling all over the trunk on the way home. But, tying them off presents another problem. Getting them untied, especially the plastic bags, can be difficult if not impossible. Most people consider it not worth the effort and rip them apart. There’s a simple answer to that problem. Since a picture is worth a thousand words, I have a brief slide show that explains the process. Once the bags are tied in the manner I show in the pictures, they untie easily and can be used over and over.

Since a picture is worth a thousand words, I have put together a slide show tutorial. You can access the slide show by going to the URL in the resource box.

Helpful health, how-to, travel and automotive information can be accessed by going to http://www.newliferoadmap.com

Your Green Life Segment Of Sun Light

5 Easy Tips Conserving Water

Everyone is looking for ways to save money and help conserve our natural resources. There are many methods that are easy to start in your own homes, but one very simple and obvious way to save is by reducing water consumption. Here are just a few easy water saving tips that you can begin doing today.

1.  Turn off running water in your sink or shower when you’re actually using the water. You can easily fill the sink with a enough water to wash your face, or fill a cup to brush your teeth. You may consider turning off the shower faucet while you’re washing your hair and then turn on again to rinse. Think about how much water is wasted. The same goes for dishes in the kitchen, turn off the water until you’re ready to rinse.

2.  There are low-water consumption toilets available that use only a couple of gallons of water each time they are flushed. If you have a standard toilet, one green living tip you may consider is placing a plastic bottle filled with sand into your toilet tank. This little trick helps the tank fill up faster and use less water.

3.  The laundry is another area where it is easy to waste water, and just as easy to save. Do your laundry in large loads rather than several smaller ones.

4. Limit your water waste outdoors. Don’t wash your car or driveway as often as you have been, and when you do, turn off the outside faucet until it’s time to rinse your car.

5. Look throughout your home, checking the faucets, toilets and pipes for any leaks. The very smallest of drips coming from a leaking pipe can eventually cost you a lot of money. Fix any leaks that you find.

If you are looking for simple ways to save the planet and save yourself money, start at home with these 5 easy steps. The planet and your wallet will thank you.

Learn more Green Living Tips and Ideas at http://greenlivingtipsandideas.com

Star News Of monsanto Seeds

Green Cab VT News Report

Clean Landfills

We’ve all read the stories about how municipal water systems in the United States are contaminated with toxins such as  lead, mercury, copper and even bacteria. In some parts of the country, stories of raw sewage leaks into fresh water supplies have made the news. And, people have reacted by drinking expensive bottled water as a supposedly healthier alternative to ordinary, inexpensive tap water.

City Water Supplies Are Safe

Of course, the truth about the safety of the nation’s municipal water supplies has finally come forth – drinking water from household taps virtually anywhere in the country is safe, pure and incredibly inexpensive. And, we’re learning that bottled water isn’t as healthy for us as we first thought. 

Get Off The Bottle

First there’s the plastic container, or bottle itself.  That convenient, plastic water bottle we’ve gotten used to carrying around is made from plastic material that contains cancer-producing toxins called phthalates.  These toxins actually leach into the water in the plastic bottle and accumulate in our bloodstreams.  Studies show that the concentrations of phthalates in our systems are increasing with each generation, mainly as a result of drinking water bottled in toxic plastic containers. 

Plastic is Hardly Boidegradable

These plastic bottles aren’t biodegradable.  Plastic throw-aways now represent at least 25% of the contents of our landfills.  And plastics won’t break down for around 10,000 years – some plastics can take even longer to degrade.  So our healthy-water myth has turned into a big health hazard.  What can people do?

A Nice and Effective Alternative

Fortunately, there are many easy and inexpensive alternatives to our drinking water challenges.You can easily install a simple charcoal-type filter system on your kitchen faucet. These inexpensive filters can remove up to 99.9% of heavy metals and other toxins that may (or mostly may not) be present in your city’s drinking water. And you can now buy a portable water filtration system that’s as convenient as your old plastic sports bottle, but the bottle is not made of toxic materials.

Cheap Filter Removes Most Contaminants

The filters that can be attached to your kitchen faucet are cheap (generally under $50) can be found at most hardware stores, reduce chlorine and heavy metals, and generally make your tap water taste better.  For example, the Brita system costs about $20 – 40 for a starter set, and $20 for each replacement filter.  It will filter about 100 gallons of drinking water and lasts for about 4 months.

Portable Filtration is the “Wave” of The Future

For about the same price, you can now get a 16 ounce portable water filtration system from Back to the Tap, which actually filters as you drink.  It uses a number 4 LDPE plastic bottle, which is the kind of plastic that doesn’t normally leach phthalates.  The filters are replaceable, and you can refill anywhere with plain tap water.  It can be refilled about 300 times, and that’s 300 disposable plastic bottles you’re not throwing into already full landfills.

Going green does take some conscious thought and careful planning, but it’s getting easier every day to go green.  In this case, you will be rewarded with better health and less plastic in landfills – and more money in your wallet.  Remember – bottled water costs MUCH more than gasoline, per gallon. So, save your health and the environment and tons of cash – by drinking water from your own household tap!

There’s no reason to poison your family and spend thousands of dollars just to have a clean home. Clean your house with simple and pure natural cleaners – and save enough money for a really nice vacation! Want to find out how to go green, save money and save Planet Earth? Click HERE to find out how being green can save you green!

Noise and Vibration Control

Noise and vibration control is an issue that is much more common than one might originally think. In fact, it can creep up in the most unlikely of places. A good case in point is animal lab environments. Indeed, ALN Magazine recently ran an article titled “Noise & Vibration Considerations for the Animal Lab Environment.” Therein, the publication pointed out, “In the lab animal facility setting, noise, sound, and vibration affect the life cycle, interaction, and behavior of animals.” However, because “the impact of noise, sound, and vibration is a largely undocumented factor in the research,” it’s an often overlooked issue.

“If the sound pressure levels get too high,” the article continues, “there is a negative impact on animals and structures.” Vibration control, however, is just as important to these animals as noise control in that it “is a driving force behind radiated sound.”

Obviously, exposure to noise and vibration can be detrimental to an animal’s hearing, but the risks don’t stop there. “Sound and vibration can [also] have a physical impact on animals.” Even more startling, “Smaller animals are more susceptible to the affects of sound and vibration over time and will adapt or adjust accordingly. In some cases, mutations may result from exposure to undesirable conditions.”

How can animal laboratories mitigate these problems? The magazine notes, “The designers can control items that are constant disturbances that may greatly impact the animal community. Items within the designer’s control include ventilation system design, machinery vibration isolation, wall construction, lighting selection, and computer terminal placement.”

During the design process, animal labs may want to consult with a producer of custom-molded rubber and rubber-to-metal bonded parts for noise and vibration control. A world leader in the creation of rubber molding and rubber-to-metal bonded parts can help to create an environment that is not only safe for the animals being kept there but is also conducive to a healthy work environment for the people who are employed there.

The Vibro-Insulator line of isolators and mounts, in particular, aid in the control of noise, vibration, and shock. Selecting the right type of mount for an individual animal lab’s specific applications can prove tricky, however. That’s why consultation with an expert with reputable qualifications in rubber molding and rubber-to-metal bonding can be very beneficial.

Of course, once professional advice has been obtained, browsing the Vibro-Insulator catalog allows animal labs easy navigation so they can select the correct mount for their application. Rubber Vibro-Insulators come in a variety of styles and sizes to handle most vibration isolation problems. Most of the mount styles are designed to be used in either the compression or shear direction.
Selection of the proper Vibro-Insulator for a specific application boils down to a multi-step mathematical function that an expert can calculate for the lab or into which the lab’s design team can plug the following information:

1. The maximum load that must be supported.
2. The number of mounts supporting the load.
3. The frequency of the disturbing vibration.
4. Any restrictions on the size or style of the mount based on space limitations or assembly considerations.

Carmen Fontana is a Web Services Manager for Western Reserve Internet Services. Karman Rubber is a world leader in vibration control.

BBC World News America

Benefits For Municipal Waste Management with Plasma Gasification

Plasma Gasification Plant (PGP) projects are being developed by at least five gas plasma technology companies, and there are real benefits to be obtained from this technology for the destruction of Municipal Solid Waste (MSW).

There is some debate still whether the process has been demonstrated to be a vaible technology which can be reliably operated by our waste management companies at reasonable cost and in compliance with all emissions regulations. However, the consensus seems to be largely in acceptance now that the technology is largely proven and inherently cleaner than incineration.

Although, gasification is used as a power generating technology, and gas plasma plants do provide a power feed-in to the local power grid, it should be realised by all that the purpose of selecting plasma gasification is currently that of achieving maximum waste mass destruction. The intent of the PGP is primarily to provide an efficent and clean method of dispoing of large quantities of residual MSW. Plasma gasification, although it does produce energy from waste is not primarliy an Energy from Waste (EfW) or Waste to Energy technology. There are other better proven, more efficient, and potentially always also cheaper ways to produce Energy from Waste, such as incineration.

PGPs suffer a high sacrificial load from the use of power at the electrodes to generate the plasma, and energy is also expended before the MSW reaches the plasma zone in the gasifier in chopping up and ensuring that the particle size of the waste is quite small. For this reason they do expend a large proportion of the power generated just in maintaining their own internal power demand.

However, as a waste destruction method producing an inert residue without creating at the same time high levels of toxic gaseous emissions the gas plasma process excels according to reports made to date. It has every reason to be cleaner as well because the reactions which take place in the plasma state take place so quickly and completely that the toxic organic chemicals produced in other combustion processes simply don’t get a change to be produced.

For a waste management process PGP therefore holds a very good prospect of adoption, as it is a process which is very efficient at diverting waste away from landfill, and thus scores highly among local authority waste disposal engineers who are constantly seeking to comply with regulations to reduce the amount of organic waste sent to landfill.

The PGP process however, also holds another merit and that is that it is being viewed more favourably by the public than incineration, and one main reason for that would be its clean emissions record when compared with incinerators historically.

Throughout Europe the requirement for BMW to be reduced by ever larger percentages necessitates the use of new technology to achieve this high rate of waste diversion, even after high recycling has also been achieved.

Look out for a plasma gasification plant appearing in a district near you soon, and look favourably upon it!

Steve has built a great web site where there are a lot more facts about gasification. This is a hot subject indeed for this technology which has become an essential read for all those who appreciate renewable energy issues and are interested in taking action to reduce the impact of climate change.Article Source: http://EzineArticles.com/?expert=Steve_D_Evans

Slime Ball Award for Green Tech News 003

Some Green Thoughts: Eco-Friendly

How often when you go to the grocery store are you asked if you want paper or plastic grocery bags?  Well the best answer to that would be NEITHER.  To keep the U.S. stocked with paper and plastic grocery bags, takes about fourteen million trees and twelve million barrels of oil every year! Investing in a few reusable bags makes a lot of sense.

Think about those little paper receipts you get at the gas pump and the ATM machine.  If all people would simply note it in their checkbook, or in a small notebook when they made a purchase or withdrew money, it would be saving enough paper to encircle the globe fifteen times!

If every American would by one roll of recycled paper towels instead of the others, it would save over half a million trees. And how about turning the car off when you are waiting for someone, in the drive-thru lane  or stuck in a huge traffic jam?  When a car idles for more than a minute it is polluting the air and wasting your gas.

Cordless phones are replacing conventional phones.  But think about it… sitting in a recharging cradle and using up your electricity  twenty-four hours a day and every day of the week! Replace one or two cordless phones with your old conventional ones and you’ll save energy.  The old fashioned ones use only a tiny bit of electricity, and will work when the power is off. If you insist on the convenience of cordless phones, make sure the ones  you do get are Energy Star-rated, for high energy efficiency.

Lisa is a freelance writer with a specialty in Internet content and SEO articles. She has written thousands of articles, hundreds of ebooks and thousands of website pages and related content. She has also authored her own books and works as a consultant to other writers, Internet marketers and Internet businesses. Professional wordsmith for hire: gamer, wife, mother, entrepreneur, published poet, co-owner of game guides company (http://www.liti4.com), public speaker and Internet business consultant. You can learn more or follow Lisa’s blog from her website: http://www.freelancewriter4hire.com

american idol - green brain

Colorado Solar Plant To Create 300 Denver Jobs

DENVER â?? A Germany-based solar company plans to open its first North American manufacturing site in Denver. Gov. Bill Ritter and Denver Mayor John Hickenlooper joined officials from SMA Solar Technology for the announcement Monday.

Marketing Campaign Suggests Solar Is Sexy – Green Inc. Blog …

An industry marketing effort is deploying a Sports Illustrated swimsuit model to conduct interviews with solar industry executives at a conference this week.

ReNu: Modular Solar Panel for iPod Docks and Desk Lamps – Regen …

We’ll suspend our general disbelief for a moment to talk about the Renu, an unbelievable but incredible solar product that’s actually coming to market next year.

Inhabitat » ReNu Modular iPhone Charger Makes Solar Power Sleek

A Green Design Blog, Sustainable Design Blog, Future-forward design for the world you inhabit – your daily source for innovations in sustainable architecture and green design for the home.

Greentech Media: Solar Power International: Looking Ahead

When the solar industry gathered at the Solar Power International a year ago, the mood was buoyed by the extension of a 30 percent investment tax credit that Congress approved only a few weeks earlier. …

City of Oxnard CA – Mobile Car Wash Rules Slated

The City of Oxnard, California is concerned with the quality of its storm water and rightfully so, as it has made great strides over the years. Oxnard CA is also home to the gateway to the channel islands with some incredible beaches and nice resort style living, and all that storm water leads to the ocean and those beautiful beaches. Thus, the city has chosen to start cracking down on mobile car washes.

This should not come as any surprise to anyone, as the city had previously implemented many programs to help clean the storm water runoff. They had developed a nearly bullet proof NPDES plan to insure clean water. The beaches never looked so good and this recent ruling to finish that job nearly a decade and a half later has come all the way down to washing of cars.

Our company had dealt with this issue in the late 80s and early 90s and helped write all the NPDES BMPs for several counties near there. The devices used are fairly easy to buy, and it really doesn’t take much, further it is my contention that all mobile car washes ought to follow the rules to protect the environment and there ought to be no excuses on that.

Indeed, over the years, we’ve worked with many cities on this, in fact, one thing we did was join the committees to help write the original BMPs for surface cleaners in Ventura County, CA where the City of Oxnard is located. A mobile car wash operator should not only follow the rules but be part of the solution. Think on that.

Lance Winslow – Lance Winslow’s Bio. If you have innovative thoughts and unique perspectives, come think with Lance; http://www.WorldThinkTank.net/.

Colorado Solar Plant To Create 300 Denver Jobs

DENVER â?? A Germany-based solar company plans to open its first North American manufacturing site in Denver. Gov. Bill Ritter and Denver Mayor John Hickenlooper joined officials from SMA Solar Technology for the announcement Monday.

Marketing Campaign Suggests Solar Is Sexy – Green Inc. Blog …

An industry marketing effort is deploying a Sports Illustrated swimsuit model to conduct interviews with solar industry executives at a conference this week.

ReNu: Modular Solar Panel for iPod Docks and Desk Lamps – Regen …

We’ll suspend our general disbelief for a moment to talk about the Renu, an unbelievable but incredible solar product that’s actually coming to market next year.

Inhabitat » ReNu Modular iPhone Charger Makes Solar Power Sleek

A Green Design Blog, Sustainable Design Blog, Future-forward design for the world you inhabit – your daily source for innovations in sustainable architecture and green design for the home.

Mitsubishi solar-powered trucks – Mitsubishi offers solar-powered …

Mitsubishi solar-powered trucks – Mitsubishi Chemical will harness the power of the sun by using solar cells to power its air conditioning system in trucks so that fuel consumption and carbon dioxide emissions can be reduced in an …

An Environmental Tax to Reveal a Product’s True Cost?

Sometimes, simple acts such as going to the grocery store can turn into a moral dilemma. Is it better to choose the piece of organic fruit produced on the other side of the country or the non-organic version grown locally, 50 miles away? Are the benefits of chemical-free shampoo worth an extra 5 bucks a bottle? Will I really be able to enjoy a cheap chocolate bar knowing that the growers of the cocoa beans were likely not fairly compensated?

As much as I’d like to say that I always buy the product that is environmentally safe and sustainably produced, in reality, that’s not always the case. First, the sheer amount of information required to be able to distinguish between products is staggering. You need facts regarding environmental impact, transportation costs, and fair trade practices, to name just a few. And there are plenty of misinformation and greenwashing campaigns out there to steer you in the wrong direction.

Second, of course, there are times when the high cost of an ethically made product turns me off from buying it. Even consumers with the best of intentions have their breaking points.

The thing is, companies who go out of their way to implement sustainable practices endure a greater cost of production. Sure, they can sometimes capitalize on this by marketing to conscientious consumers who are willing to pay a bit more, but the fact remains that in today’s system, environmentally minded production is punished.

On the other hand, companies who move their factories (and jobs) to developing countries with lax environmental standards and cheap labor are able to make products at a fraction of the cost and undercut their competitors (while shipping materials and finished goods all around the world and adding to our greenhouse gas problems).

The way it’s set up, high environmental standards in one country drive companies to relocate in places where it’s permissible to pollute in order to compete in the marketplace. Chaco, the Colorado-based athletic sandal company, is a prime example of even a well-intentioned company being forced to follow suit to maintain competitive pricing on their products. In fact, 95% of all footwear in the world is produced in China, whose poor environmental regulation and sometimes dangerous environmental problems are well known.

With current talk about cap and trade emissions programs, this phenomenon may only get worse.

So how do we even the playing field and reward companies for good business practices?

When I think about this problem, I keep coming back to an idea I encountered in a casual conversation with a stranger while traveling. I can’t remember his face or his name, but his idea has stuck with me and festered in my mind for the better part of a year. His take was that putting the financial burden of environmental responsibility on the companies just doesn’t make sense for the reasons I’ve given above. In a global marketplace, it renders companies less competitive than those that operate free of environmental and labor regulations.

Wouldn’t it make more sense to put an “environmental impact” or “ecological footprint” tax on the product itself?

Ugh, a tax?

Initially, I didn’t warm to the idea either. But think about it: adding a tax proportionate to a product’s ecological and social footprint eliminates the cost advantage of irresponsible production. All those environmental costs that are currently not included in our economic system would be factored in and would increase the price of unsustainably made products.

This, in turn, would make moral dilemmas at the grocery store much easier. Is it more sustainable to buy distant, organic produce or local, non-organic produce? The tax-adjusted pricing should inform my decision. Can I afford the chemical-free shampoo? Yes, because the price of its chemical-laden competitors would be raised through the environmental impact tax and eliminate the cost advantage of choosing that product.

The money raised from the tax could fund its implementation and other sustainable programs such as public transportation (high speed rail, anyone?) and alternative energy. Perhaps it could even make a dent in our gaping budget deficit.

Won’t this cost me money?

You may be thinking, “Sure, that’s a good idea in concept, but that will raise my bills – grocery, clothes, everything.” Well, yes, that’s true. But maybe if we see the true cost of the products we casually consume, we can make a more informed decision about what is really necessary to our lives.

Additionally, programs such as this often have the greatest impact on the poor. But this could be compensated for by using some of the tax revenue for need-based assistance programs.

Regardless, running an economic system on the assumption of infinite resources is fundamentally flawed. Currently, environmental impacts such as air pollution, water pollution, and deforestation are not factored into the cost of a product: they are considered “externalities.”

These costs need to be included in the system in a way that does not punish those who engage in sustainable business practices. By taxing a product’s environmental impact, it levels the playing field for the consumer.

Disclaimer

Of course, I am not an economist or policy guru. I don’t know how to implement such a tax or if it would even be possible (though compared to creating a carbon trading market, perhaps it’s not that difficult). This is only the musing of a concerned, intelligent citizen trying to brainstorm ways to make our economic system fit within the bounds of our ecological constraints.

What do you think? Would such a tax have a beneficial effect on our production system? Join the conversation over at our website!

Jill Mueller is a conservation biologist, avid cyclist, and freelance writer. She has combined forces with a good friend and dietitian to start The Barefoot Badger, a blog promoting healthy, sustainable living. Check us out!

Save money with solar power

ReNu: Modular Solar Panel for iPod Docks and Desk Lamps – Regen …

We’ll suspend our general disbelief for a moment to talk about the Renu, an unbelievable but incredible solar product that’s actually coming to market next year.

Colorado Solar Plant To Create 300 Denver Jobs

DENVER â?? A Germany-based solar company plans to open its first North American manufacturing site in Denver. Gov. Bill Ritter and Denver Mayor John Hickenlooper joined officials from SMA Solar Technology for the announcement Monday.

Inhabitat » ReNu Modular iPhone Charger Makes Solar Power Sleek

A Green Design Blog, Sustainable Design Blog, Future-forward design for the world you inhabit – your daily source for innovations in sustainable architecture and green design for the home.

Greentech Media: Solar Power International: Looking Ahead

When the solar industry gathered at the Solar Power International a year ago, the mood was buoyed by the extension of a 30 percent investment tax credit that Congress approved only a few weeks earlier. …

Marketing Campaign Suggests Solar Is Sexy – Green Inc. Blog …

An industry marketing effort is deploying a Sports Illustrated swimsuit model to conduct interviews with solar industry executives at a conference this week.